Globaltronics Quigg GT-1000

Feature	Support
Sending
Receiving
Config

Supported Brands

Brand	Protocol
Globaltronics GmbH GT-1000 RC	quigg_gt1000
Globaltronics GmbH GT-FSI-08	quigg_gt1000
Silvercrest AAA3680-A IP20 DE	quigg_gt1000

Sender Arguments

-t   send an on signal to a device
-f   send an off signal to a device
-i   control the device with this system id (1 ... 15)
-u   control the device with this unit code (0 ... 3)
-a   control all switches in the given group
-s   control all switches in all groups

The next two parameters are optional:

-n   specify the code sequence to use (0 ... 3)
-s   specify the super codes (0 ... 7)

If the specified sequence does not exists, sequence 0 will be used instead.
If not specified a sequence will be selected at random.

Config

{
  "devices": {
    "dimmer": {
      "protocol": [ "quigg_gt1000" ],
      "id": [{
        "id": 15,
        "unit": 0
      }],
      "state": "off"
    }
  },
  "gui": {
    "Lamp": {
      "name": "TV Backlit",
      "group": [ "Living" ],
      "media": [ "all" ]
    }
  }
}

Option	Value
id	0 - 15
unit	0 - 3
state	on / off

Optional Settings

GUI Settings

Setting	Default	Format	Description
readonly	1	1 or 0	Disable controlling this device from the GUIs
confirm	1	1 or 0	Ask for confirmation when switching device

Examples

pilight-send -p quigg_gt1000 -i [0..15] -u [0..3] [-t|-f] {-n [0..3]}

Switch on or off the specified switch (-u) belonging to group (-i) optionally using specified codeseq (-n)

pilight-send -p quigg_gt1000 -i [0..15] -a [-t|-f] {-n [0..3]}

Switch on or off all switches belonging to group (-i) optionally using specified codeseq (-n)

pilight-send -p quigg_gt1000 -s [-t|-f] {-n [0..7]}

Switch on or off all compatible switches optionally using specified codeseq (-n)

When using the Web-GUI use “unit”: 4 in the config.json file for the master switch (“all”: 1) and “id”: 16 with “unit”: 5 for the super code switch (“super”: 1).