BMP180

Feature	Support
Sending
Receiving
Config

Supported Brands

Brand	Protocol
BMP180	bmp180
BMP085	bmp085

Sender Arguments

None

Config

{
  "devices": {
    "bmp180": {
      "protocol": [ "bmp180" ],
      "id": [{
        "id": "0x77"
      }],
      "temperature": 19.1,
      "pressure": 1006.8,
      "oversampling": 1
    }
  },
  "gui": {
    "temperature": {
      "name": "Temperature Sensor",
      "group": [ "Misc" ],
      "media": [ "all" ]
    }
  }
}

Option	Value
id	valid i2c path
temperature	-40 - 85
pressure	300 - 1100
oversampling	0 - 3

Optional Settings

Device Settings

Setting	Default	Format	Description
poll-interval	10	seconds	What should be the poll interval of the sensors
humidity-offset	0	number	Correct humidity value
temperature-offset	0	number	Correct temperature value

GUI Settings

Setting	Default	Format	Description
temperature-decimals	2	number	How many decimals the GUIs should display for temperature
pressure-decimals	2	number	How many decimals the GUIs should display for pressure
show-temperature	1	1 or 0	Don’t display the temperature value
show-pressure	1	1 or 0	Don’t display the pressure value

Comments

Pressure is provided in hectopascal (hPa) and temperature in degrees Celsius (°C).

Option oversampling sets the BMP180 hardware accuracy mode which is relevant for pressure readings only.

Mode	oversampling	Internal no. of samples	Conversion time pressure max. [ms]
ultra low power	0	1	4.5
standard	1	2	7.5
high resolution	2	4	13.5
ultra high resolution	3	8	25.5

The algorithm for pressure and temperature measurement is based on the specification in the official datasheet.